Single splitSEER2 16 Heats too
MRCOOL · Model MVP-48-HP-230A15
MRCOOL · Model MVP-48-HP-230A15
A central ducted system rated at 48,000 BTU covering up to 2,000 sq ft in total across the rooms it serves. It heats in winter too.
$4,099
Live price at SylvanePackage: no heat strip, 15 ft line set
Price checked Sep 30, 2026
compare.ac may earn a commission on purchases, at no cost to you. It never changes the price you pay or how we rank units.
Tracked price is up since Jul 25, 2026
Based on 53 prices we have recorded since Jul 25, 2026, not a market average.
Sizing this system
This is a whole-home system: its rated cooling is shared across several indoor units or distributed through ductwork, so there is no single room it does or does not fit. An installer sizes each zone against that room (a Manual J calculation), which is why we do not print a room verdict here.
Mini-splits are rated on SEER2, a seasonal scale, not the ENERGY STAR annual-kWh figure this dollar estimate is built from, so there is no comparable figure to show here. A blank is missing data, not a worse result: a mini-split is often the more efficient choice.
Installation cost
$2,500-6,000 fully installed for a typical room (the equipment is roughly $700-1,800, professional installation roughly $1,500-4,000+ depending on line-set run, electrical and access). The unit price you see here is hardware only; installation is the larger, separate cost.
A typical range for this system type, for comparison only, not a quote for this unit. The actual price depends on the line-set run, electrical work and access.
At a glance
Best for cooling a whole home through ductwork, sized per room by an installer.
EER2, HSPF2, SEER2, warranty, heating capacity, refrigerant, heating limit and outdoor unit size are from Sylvane's published specifications for this exact configuration, checked Sep 26, 2026.
This is a single split. This is where regulation bites. Under EPA Section 608 the refrigerant circuit may only be opened by a certified technician, and the EPA is explicit that this includes connecting or disconnecting the pre-charged line sets sold with "DIY" mini-split kits. No federal law stops you doing the mounting, bracketing and line routing yourself, but handling the refrigerant without certification voids the warranty and is a violation. Most US jurisdictions also require permits for a new outdoor unit: typically mechanical or building for the wall penetration and mount, plus electrical for the dedicated 240 V circuit and disconnect. An HOA nearly always has to approve exterior equipment in advance, and local noise ordinances can cap how loud the condenser may be at the property line. This varies by city and county, so confirm with your building department before buying hardware.
Certified installer
R-454B
Compare splits against the other types on price, noise, efficiency and install.
MRCOOL
A central ducted system rated at 36,000 BTU covering up to 1,550 sq ft in total across the rooms it serves. It heats in winter too.
$4,099
at Sylvane
Package: 8 kW heat strip, 35 ft line set
MRCOOL
A central ducted system rated at 60,000 BTU covering up to 2,550 sq ft in total across the rooms it serves. It heats in winter too.
MRCOOL
A central ducted system rated at 30,000 BTU covering up to 1,400 sq ft in total across the rooms it serves. It heats in winter too.
$4,379
at Sylvane
Package: no heat strip, 15 ft line set
$3,399
at Sylvane
Package: no heat strip, 15 ft line set