Do I need a professional to install the MRCOOL 36,000 BTU 3 Ton VersaPro Central Ducted Heat Pump Split System?

Yes. As a single split it needs a certified installer. Usually needs permission.

Single splitSEER2 16.7 Heats too

MRCOOL · Model MVP36HP2A35OH08

36,000 BTU 3 Ton VersaPro Central Ducted Heat Pump Split System

Name: MRCOOL 36,000 BTU 3 Ton VersaPro Central Ducted Heat Pump Split System
Brand: MRCOOL
Price: 4099 USD
Availability: InStock

A central ducted system rated at 36,000 BTU covering up to 1,550 sq ft in total across the rooms it serves. It heats in winter too.

$4,099

Live price at Sylvane

Package: 8 kW heat strip, 35 ft line set

Price checked Sep 30, 2026

Buy at Sylvane In stock

compare.ac may earn a commission on purchases, at no cost to you. It never changes the price you pay or how we rank units.

Price history at Sylvane

Lowest since Jul 25, 2026:$3,949on Aug 8, 2026

Tracked price is up since Jul 25, 2026

Based on 53 prices we have recorded since Jul 25, 2026, not a market average.

Sizing this system

This is a whole-home system: its rated cooling is shared across several indoor units or distributed through ductwork, so there is no single room it does or does not fit. An installer sizes each zone against that room (a Manual J calculation), which is why we do not print a room verdict here.

Running cost

Mini-splits are rated on SEER2, a seasonal scale, not the ENERGY STAR annual-kWh figure this dollar estimate is built from, so there is no comparable figure to show here. A blank is missing data, not a worse result: a mini-split is often the more efficient choice.

Installation cost

$2,500-6,000 fully installed for a typical room (the equipment is roughly $700-1,800, professional installation roughly $1,500-4,000+ depending on line-set run, electrical and access). The unit price you see here is hardware only; installation is the larger, separate cost.

A typical range for this system type, for comparison only, not a quote for this unit. The actual price depends on the line-set run, electrical work and access.

At a glance

Best for cooling a whole home through ductwork, sized per room by an installer.

Cooling

10.6 kW

Size

Large

Noise

48 dB

Audible

Install: Certified installerPermission: Usually needs permission

Performance

Cooling capacity: 36,000 BTU · 10.6 kW
Heating capacity: Yes
Heats down to: -22°F outdoors
Total coverage: up to 1,550 sq ft
Energy Star: Not published
SEER2: 16.7
HSPF2 (heating): 9.3
EER2: 10
Annual energy (cooling): Not published

Noise, size & features

Model number: MVP36HP2A35OH08
Indoor noise: 48 dB(A)about as loud as a refrigerator
Outdoor noise: Not published
Indoor unit: 21 x 49 x 21.02 in
Outdoor unit: 37.24 x 31.89 x 16.14 in (W x H x D)
Refrigerant: R-454B
Wi-Fi / app: Not published
Outdoor unit needed: Yes
Warranty: 10-Year Limited Parts and Compressor Warranty

EER2, HSPF2, SEER2, warranty, refrigerant, heating limit and outdoor unit size are from Sylvane's published specifications for this exact configuration, checked Sep 26, 2026.

What is good

Uses R-454B (GWP 466), the low-GWP class new US residential equipment moved to.

Installation & the rules that apply

This is a single split. This is where regulation bites. Under EPA Section 608 the refrigerant circuit may only be opened by a certified technician, and the EPA is explicit that this includes connecting or disconnecting the pre-charged line sets sold with "DIY" mini-split kits. No federal law stops you doing the mounting, bracketing and line routing yourself, but handling the refrigerant without certification voids the warranty and is a violation. Most US jurisdictions also require permits for a new outdoor unit: typically mechanical or building for the wall penetration and mount, plus electrical for the dedicated 240 V circuit and disconnect. An HOA nearly always has to approve exterior equipment in advance, and local noise ordinances can cap how loud the condenser may be at the property line. This varies by city and county, so confirm with your building department before buying hardware.

Installation

Certified installer

Refrigerant

R-454B

GeneralRenters: get written landlord consent firstReviewed June 2026Often blocks install

United StatesUS: EPA Section 608 certified technician for refrigerantReviewed June 2026Often blocks install

ArizonaArizona: municipal mechanical permit for AC replacementReviewed June 2026Permit required

CaliforniaCalifornia: Title 24 permit and HERS verificationReviewed June 2026Permit required

FloridaFlorida: mechanical permit and licensed contractor for AC workReviewed June 2026Permit required

See full rules by region

Common questions about the MRCOOL 36,000 BTU 3 Ton VersaPro Central Ducted Heat Pump Split System

How loud is the MRCOOL 36,000 BTU 3 Ton VersaPro Central Ducted Heat Pump Split System?: 48 dB(A) indoors, about as loud as a refrigerator.
How energy-efficient is the MRCOOL 36,000 BTU 3 Ton VersaPro Central Ducted Heat Pump Split System?: Its efficiency rating is SEER2 16.7 for cooling and HSPF2 9.3 for heating.
Do I need a professional to install the MRCOOL 36,000 BTU 3 Ton VersaPro Central Ducted Heat Pump Split System?: Yes. As a single split it needs a certified installer. Usually needs permission.
Does the MRCOOL 36,000 BTU 3 Ton VersaPro Central Ducted Heat Pump Split System heat as well as cool?: Yes. It is a heat pump that also heats.
How cold can it get outside before the MRCOOL 36,000 BTU 3 Ton VersaPro Central Ducted Heat Pump Split System stops heating?: Its retailer's specification for this exact configuration rates it to keep heating down to -22°F outdoors. That is its operating limit, not its full output: a heat pump delivers less heat as it gets colder, so size it for your coldest days.

Is a split even the right type?

Compare splits against the other types on price, noise, efficiency and install.

Mini-split vs window Mini-split vs portable

$3,199

at Sylvane

Package: no heat strip, 15 ft line set

Compare