Single splitSEER2 19.2 Heats too
Senville · Model SENL-18CD-16
Senville · Model SENL-18CD-16
A wall-mounted split air conditioner rated at 18,000 BTU. It heats in winter too.
$999
Live price at SylvanePackage: 16 ft line set
Price checked Sep 30, 2026
compare.ac may earn a commission on purchases, at no cost to you. It never changes the price you pay or how we rank units.
Will it cool your room?
This unit's cooling matches a 861 sq ft room, on an estimate from its cooling power. Set your room size to check the fit for your space.
Mini-splits are rated on SEER2, a seasonal scale, not the ENERGY STAR annual-kWh figure this dollar estimate is built from, so there is no comparable figure to show here. A blank is missing data, not a worse result: a mini-split is often the more efficient choice.
Installation cost
$2,500-6,000 fully installed for a typical room (the equipment is roughly $700-1,800, professional installation roughly $1,500-4,000+ depending on line-set run, electrical and access). The unit price you see here is hardware only; installation is the larger, separate cost.
A typical range for this system type, for comparison only, not a quote for this unit. The actual price depends on the line-set run, electrical work and access.
At a glance
Best for year-round use, cooling in summer and heating in winter.
EER2, SEER2, warranty, heating capacity, refrigerant, heating limit and outdoor unit size are from Sylvane's published specifications for this exact configuration, checked Sep 26, 2026.
This is a single split. This is where regulation bites. Under EPA Section 608 the refrigerant circuit may only be opened by a certified technician, and the EPA is explicit that this includes connecting or disconnecting the pre-charged line sets sold with "DIY" mini-split kits. No federal law stops you doing the mounting, bracketing and line routing yourself, but handling the refrigerant without certification voids the warranty and is a violation. Most US jurisdictions also require permits for a new outdoor unit: typically mechanical or building for the wall penetration and mount, plus electrical for the dedicated 240 V circuit and disconnect. An HOA nearly always has to approve exterior equipment in advance, and local noise ordinances can cap how loud the condenser may be at the property line. This varies by city and county, so confirm with your building department before buying hardware.
Certified installer
R-454B
Compare splits against the other types on price, noise, efficiency and install.
The questions buyers ask, answered from live prices and real specs. See where a single split like this fits.
Senville
A wall-mounted split air conditioner rated at 12,000 BTU for rooms up to 700 sq ft. It heats in winter too.
$829
at Sylvane
Package: 16 ft line set
+ pro install, usually $1,500-4,000
Lowest since Jul 26, 2026 $829
Senville
A wall-mounted split air conditioner rated at 12,000 BTU for rooms up to 700 sq ft. It heats in winter too.
Editor's pickSenville
The Senville LETO 12K (115V) is a budget single-zone inverter heat pump rated 21.2 SEER2 on R-454B, with quiet 17.5 dB minimum indoor noise and built-in WiFi. It suits rooms of roughly 450 to 750 sq ft.
$817
at Sylvane
Package: 16 ft line set
+ pro install, usually $1,500-4,000
$800
Hardware price
+ pro install, usually $1,500-4,000