Midea 10,000 BTU Through-The-Wall Air Conditioner
Through-the-wall unit

Midea

10,000 BTU Through-The-Wall Air Conditioner

A through-the-wall air conditioner rated at 10,000 BTU for rooms up to 450 sq ft. It installs in a wall sleeve.

$409

List price

No live retailer for this exact model right now.

Last listed at Sylvane for $409 on Aug 11, 2026. We have not been able to confirm it since.

The closest through-the-wall unit you can buy today:

Frigidaire 10,000 BTU Through-the-Wall Air Conditioner 230V - 230vFrigidaire 10,000 BTU Through-the-Wall Air Conditioner 230V - 230vCovers up to 450 sq ft In stock$749View

compare.ac may earn a commission on purchases, at no cost to you.

Will it cool your room?

Room size (assumed)450 sq ft ≈ 41.8 m²
Fits a 450 sq ft room

This unit's cooling matches a 450 sq ft room. Set your room size to check the fit for your space.

Compare wall units by the sleeve they fit

At a glance

Best for replacing a through-the-wall unit in an existing wall sleeve.

Cooling
10,000 BTU
Size
Average
Noise
-
Install: Slides into a wall sleevePermission: A new wall opening usually needs a permit

Performance

Cooling capacity
10,000 BTU · 2.9 kW
Heating capacity
Cooling only
Room coverage
up to 450 sq ft
Energy Star
Not published
CEER
Not published
Annual energy (cooling)
Not published

Noise, size & features

Indoor noise
Not published
Outdoor noise
Not published
Indoor unit
24.2 x 14.5 x 20.3 in
Outdoor unit
None
Refrigerant
R-32
Wi-Fi / app
Not published
Outdoor unit needed
No
Power supply
115 V, NEMA 5-15P plug
Wall sleeve
Not confirmed by the maker
Warranty
1-Year Limited Warranty

Supply voltage, plug, cooling power, cooling current, refrigerant and warranty are from Sylvane's published specifications for this exact configuration, checked Oct 18, 2026.

Power while cooling: From the maximum cooling draw its retailer lists for this exact model. An hour's cost is at that draw and the US average electricity price of 18.44¢/kWh (U.S. Energy Information Administration, Electric Power Monthly Table 5.6.A (residential average, May 2026)). The compressor cycles once the room is cool, so most hours cost less.

Will it fit your wall sleeve?

We could not confirm which sleeve sizes it fits from its maker's own documents, so check the installation manual against the inside width and height of your sleeve before you buy.

Every through-the-wall AC and PTAC by the sleeve it fits

What is good

  • Uses R-32 (GWP 675), the low-GWP class new US residential equipment moved to.

Installation & the rules that apply

This is a through-the-wall air conditioner. It sits in a sleeve built into an exterior wall, so the window-unit mounting and bracket rules do not apply to it. Swapping it into an existing sleeve is a like-for-like replacement; cutting a new opening changes the building's exterior wall, which usually needs a building permit and, in a condo, co-op or historic building, approval first.

Installation

Slides into a wall sleeve

Refrigerant

R-32

GeneralRenters: get written landlord consent firstReviewed June 2026Often blocks install
GeneralCondo / HOA: exterior changes need approvalReviewed June 2026Permit required
GeneralHistoric / listed buildings: consent before any exterior unitReviewed June 2026Permit required
MassachusettsMassachusetts: local historic district approval (MGL c.40C)Reviewed June 2026Permit required
United StatesUS: local mechanical and electrical permits (vary by city)Reviewed June 2026Permit required
See full rules by region

Common questions about the Midea 10,000 BTU Through-The-Wall Air Conditioner

How many watts does the Midea 10,000 BTU Through-The-Wall Air Conditioner use?
It draws 943 watts (8.3 amps at 115 V) while cooling at full power, per its retailer's specification for this exact model. At the US average electricity price that is about $0.17 an hour; once the room is cool the compressor cycles, so most hours cost less.
What size room does the Midea 10,000 BTU Through-The-Wall Air Conditioner cool?
It is rated to cool a room up to 450 sq ft (10,000 BTU · 2.9 kW).
Do I need a professional to install the Midea 10,000 BTU Through-The-Wall Air Conditioner?
Not to replace a unit, but usually yes for a new opening. Sliding it into an existing wall sleeve it fits is a job you can do yourself (it is heavy, so plan on two people), with no refrigerant work. A new installation means cutting an opening through an exterior wall and fitting a sleeve, which is contractor work and usually needs a building permit.

Buying guides for a through-the-wall unit like this

The questions buyers ask, answered from live prices and real specs. See where a through-the-wall unit like this fits.