Friedrich 14,500 BTU Zone Premier PTAC with Heat Pump
PTAC Heats too

Friedrich · Model PDH15K5SGR3

14,500 BTU Zone Premier PTAC with Heat Pump

A packaged terminal air conditioner (PTAC) rated at 14,500 BTU for rooms up to 800 sq ft. It heats in winter too and installs in a wall sleeve.

$1,259

Live price at Sylvane

Price checked Nov 16, 2026

compare.ac may earn a commission on purchases, at no cost to you. It never changes the price you pay or how we rank units. As an Amazon Associate I earn from qualifying purchases.

Not ready to buy?

Get a free alert the moment this price drops. No account, unsubscribe anytime.

Will it cool your room?

Room size (assumed)700 sq ft ≈ 65 m²
Fits a 700 sq ft room

This unit's cooling matches a 700 sq ft room. Set your room size to check the fit for your space.

Every PTAC side by side: heat, supply and EER

At a glance

Best for hotel rooms, apartments and offices built with a ptac wall sleeve.

Cooling
14,500 BTU
Size
Large
Noise
53 dB
Audible
Install: Wall sleeve and a dedicated circuitPermission: A new wall opening or circuit usually needs a permit

Where to buy

2 retailers
  • SylvaneLowest In stock$1,259Buy
  • Abt Electronics In stock$1,339Buy
  • AmazonPrice and stock shown on AmazonSearch Amazon
Prices & stock checked Nov 16, 2026.compare.ac may earn a commission on purchases, at no cost to you. It never changes the price you pay.As an Amazon Associate I earn from qualifying purchases.

Performance

Cooling capacity
14,500 BTU · 4.2 kW
Heating capacity
13,800 BTU
Power at rated heat
1,310 W, about $0.24 an hour
Room coverage
up to 800 sq ft
Energy Star
Not published
EER
10.4 (federal minimum 9.65)
Annual energy (cooling)
Not published

Noise, size & features

Model number
PDH15K5SGR3
Indoor noise
53 dB(A)about as loud as a dishwasher
Outdoor noise
Not published
Indoor unit
42 x 16 x 21 in
Outdoor unit
None
Refrigerant
R-32
Wi-Fi / app
Not published
Outdoor unit needed
No
Power supply
208/230 V, NEMA 6-30P plug
Wall sleeve
Fits a standard 42 x 16 in. PTAC sleeve
Warranty
2-Year Limited Warranty on Parts and Labor; 5-Year Limited Warranty on Sealed Refrigeration System

EER, heating capacity, heat source, heating power, supply voltage, plug, cooling power, cooling current, refrigerant and warranty are from Sylvane's published specifications for this exact configuration, checked Oct 31, 2026.

Power while cooling: From the maximum cooling draw its retailer lists for this exact model. An hour's cost is at that draw and the US average electricity price of 18.44¢/kWh (U.S. Energy Information Administration, Electric Power Monthly Table 5.6.A (residential average, May 2026)). The compressor cycles once the room is cool, so most hours cost less.

Hourly heating cost: At the rated heating output and the US average electricity price of 18.44¢/kWh (U.S. Energy Information Administration, Electric Power Monthly Table 5.6.A (residential average, May 2026)). A thermostat cycles the heat, so most hours cost less. A heat pump's output and advantage shrink as it gets colder outside, and one with an electric back-up heater draws far more while that runs.

Will it fit your wall sleeve?

Fits standard 42 x 16-inch PTAC sleeves, other makers' included, without a baffle kit as long as the sleeve is no deeper than 13¾ inches (a deeper sleeve needs one). A new installation needs Friedrich's PDXWS sleeve and an outdoor grille, sold separately. Source: Friedrich PTAC brochure

Every through-the-wall AC and PTAC by the sleeve it fits

Installation & the rules that apply

This is a packaged terminal air conditioner (PTAC). It sits in a wall sleeve with an outdoor grille and runs on its own circuit, so the window-unit mounting and bracket rules do not apply to it. A new opening or circuit usually needs building and electrical permits and, in a condo, co-op or historic building, approval first.

Installation

Wall sleeve and a dedicated circuit

Refrigerant

R-32

GeneralRenters: get written landlord consent firstReviewed June 2026Often blocks install
GeneralCondo / HOA: exterior changes need approvalReviewed June 2026Permit required
GeneralHistoric / listed buildings: consent before any exterior unitReviewed June 2026Permit required
MassachusettsMassachusetts: local historic district approval (MGL c.40C)Reviewed June 2026Permit required
United StatesUS: local mechanical and electrical permits (vary by city)Reviewed June 2026Permit required
See full rules by region

Common questions about the Friedrich 14,500 BTU Zone Premier PTAC with Heat Pump

How loud is the Friedrich 14,500 BTU Zone Premier PTAC with Heat Pump?
53 dB(A) indoors, about as loud as a dishwasher.
How many watts does the Friedrich 14,500 BTU Zone Premier PTAC with Heat Pump use?
It draws 1,400 watts (6.5 amps at 208/230 V) while cooling at full power, per its retailer's specification for this exact model. At the US average electricity price that is about $0.26 an hour; once the room is cool the compressor cycles, so most hours cost less.
What size room does the Friedrich 14,500 BTU Zone Premier PTAC with Heat Pump cool?
It is rated to cool a room up to 800 sq ft (14,500 BTU · 4.2 kW).
Do I need a professional to install the Friedrich 14,500 BTU Zone Premier PTAC with Heat Pump?
Usually, yes. A PTAC installs in a wall sleeve with an outdoor grille and runs on its own dedicated circuit, so a new installation (the wall opening, sleeve, grille and wiring) is work for a contractor and an electrician. Swapping one into an existing PTAC sleeve with matching power is a simpler like-for-like replacement.
Does the Friedrich 14,500 BTU Zone Premier PTAC with Heat Pump heat as well as cool?
Yes. It is a heat pump that also heats, rated 13,800 BTU of heating output on 1,310 watts. That is about 3.1 times the heat per watt of an electric coil, at its rating point. At its rated heat it costs about $0.24 an hour at the US average electricity price.

Buying guides for a PTAC like this

The questions buyers ask, answered from live prices and real specs. See where a PTAC like this fits.

$1,259

In stock. We may earn a commission.

Buy at Sylvane