Friedrich Uni-Fit 8,000 BTU Through-the-Wall Air Conditioner with Heat
Through-the-wall unit Heats too

Friedrich · Model UET08B11A-C

Uni-Fit 8,000 BTU Through-the-Wall Air Conditioner with Heat

A through-the-wall air conditioner rated at 8,000 BTU for rooms up to 350 sq ft. It heats in winter too and installs in a wall sleeve.

$889

Live price at Electronic Express

Price checked Nov 16, 2026

compare.ac may earn a commission on purchases, at no cost to you. It never changes the price you pay or how we rank units. As an Amazon Associate I earn from qualifying purchases.

Not ready to buy?

Get a free alert the moment this price drops. No account, unsubscribe anytime.

Will it cool your room?

Room size (assumed)350 sq ft ≈ 32.5 m²
Fits a 350 sq ft room

This unit's cooling matches a 350 sq ft room. Set your room size to check the fit for your space.

Compare wall units by the sleeve they fit

At a glance

Best for replacing a through-the-wall unit in an existing wall sleeve.

Cooling
8,000 BTU
Size
Average
Noise
-
Install: Slides into a wall sleevePermission: A new wall opening usually needs a permit

Performance

Cooling capacity
8,000 BTU · 2.3 kW
Heating capacity
4,200 BTU
Heat source
Electric coil
Power at rated heat
1,470 W, about $0.27 an hour
Room coverage
up to 350 sq ft
Energy Star
Not published
CEER
Not published
Annual energy (cooling)
Not published

Noise, size & features

Model number
UET08B11A-C
Indoor noise
Not published
Outdoor noise
Not published
Indoor unit
24.25 x 14.5 x 20.25 in (W x H x D)
Outdoor unit
None
Refrigerant
Not published
Wi-Fi / app
Not published
Outdoor unit needed
No
Power supply
115 V
Wall sleeve
Fits 24½, 26 and 27 in. sleeves

Heating capacity, heating power, supply voltage, cooling power, cooling current and unit size are from Electronic Express's published specifications for this exact configuration, checked Oct 30, 2026.

Power while cooling: From the maximum cooling draw its retailer lists for this exact model. An hour's cost is at that draw and the US average electricity price of 18.44¢/kWh (U.S. Energy Information Administration, Electric Power Monthly Table 5.6.A (residential average, May 2026)). The compressor cycles once the room is cool, so most hours cost less.

Hourly heating cost: At the rated heating output and the US average electricity price of 18.44¢/kWh (U.S. Energy Information Administration, Electric Power Monthly Table 5.6.A (residential average, May 2026)). A thermostat cycles the heat, so most hours cost less. A heat pump's output and advantage shrink as it gets colder outside, and one with an electric back-up heater draws far more while that runs.

Will it fit your wall sleeve?

Friedrich says the Uni-Fit fits existing 24½, 26 and 27-inch sleeves, and lists these makers' sleeves (25½ to 27 inches wide) as compatible: Amana, Carrier 51S and 52F, Fedders/Emerson, Friedrich WallMaster (WSE), GE/Hotpoint, Whirlpool, Frigidaire and White-Westinghouse. A trim ring covers gaps of up to 1 inch at the sides and ½ inch at the top, and in an existing sleeve Friedrich's manual has you replace the old rear grille with the one in the kit. A new installation needs Friedrich's USC or USEZ sleeve, sold separately. Source: Friedrich Uni-Fit brochure (sleeve table)

Every through-the-wall AC and PTAC by the sleeve it fits

Installation & the rules that apply

This is a through-the-wall air conditioner. It sits in a sleeve built into an exterior wall, so the window-unit mounting and bracket rules do not apply to it. Swapping it into an existing sleeve is a like-for-like replacement; cutting a new opening changes the building's exterior wall, which usually needs a building permit and, in a condo, co-op or historic building, approval first.

Installation

Slides into a wall sleeve

Refrigerant

-

GeneralRenters: get written landlord consent firstReviewed June 2026Often blocks install
GeneralCondo / HOA: exterior changes need approvalReviewed June 2026Permit required
GeneralHistoric / listed buildings: consent before any exterior unitReviewed June 2026Permit required
MassachusettsMassachusetts: local historic district approval (MGL c.40C)Reviewed June 2026Permit required
United StatesUS: local mechanical and electrical permits (vary by city)Reviewed June 2026Permit required
See full rules by region

Common questions about the Friedrich Uni-Fit 8,000 BTU Through-the-Wall Air Conditioner with Heat

How many watts does the Friedrich Uni-Fit 8,000 BTU Through-the-Wall Air Conditioner with Heat use?
It draws 820 watts (8.5 amps at 115 V) while cooling at full power, per its retailer's specification for this exact model. At the US average electricity price that is about $0.15 an hour; once the room is cool the compressor cycles, so most hours cost less.
What size room does the Friedrich Uni-Fit 8,000 BTU Through-the-Wall Air Conditioner with Heat cool?
It is rated to cool a room up to 350 sq ft (8,000 BTU · 2.3 kW).
Do I need a professional to install the Friedrich Uni-Fit 8,000 BTU Through-the-Wall Air Conditioner with Heat?
Not to replace a unit, but usually yes for a new opening. Sliding it into an existing wall sleeve it fits is a job you can do yourself (it is heavy, so plan on two people), with no refrigerant work. A new installation means cutting an opening through an exterior wall and fitting a sleeve, which is contractor work and usually needs a building permit.
Does the Friedrich Uni-Fit 8,000 BTU Through-the-Wall Air Conditioner with Heat heat as well as cool?
Yes. It heats with an electric coil, rated 4,200 BTU of heating output on 1,470 watts. At its rated heat it costs about $0.27 an hour at the US average electricity price.

Buying guides for a through-the-wall unit like this

The questions buyers ask, answered from live prices and real specs. See where a through-the-wall unit like this fits.

$889

In stock. We may earn a commission.

Buy at Electronic Express