Do I need a professional to install the Friedrich 9,600 BTU ZoneAire Select PTAC w/ Heat Pump - 208-230V?

Usually, yes. A PTAC installs in a wall sleeve with an outdoor grille and runs on its own dedicated circuit, so a new installation (the wall opening, sleeve, grille and wiring) is work for a contractor and an electrician. Swapping one into an existing PTAC sleeve with matching power is a simpler like-for-like replacement. It runs on 230 volts, so it needs a matching 230-volt outlet on its own circuit, and adding one is a job for an electrician.

PTAC Heats too

Friedrich

9,600 BTU ZoneAire Select PTAC w/ Heat Pump - 208-230V

Name: Friedrich 9,600 BTU ZoneAire Select PTAC w/ Heat Pump - 208-230V
Brand: Friedrich

A packaged terminal air conditioner (PTAC) rated at 9,600 BTU for rooms up to 450 sq ft. It heats in winter too and installs in a wall sleeve.

No live retailer for this exact model right now.

Last listed at Sylvane for $1,049 on Jul 6, 2026. We have not been able to confirm it since.

The closest PTAC you can buy today:

Friedrich 9,600 BTU ZoneAire Select PTAC w/ Heat Pump - 265VCovers up to 450 sq ft In stock$1,199View

compare.ac may earn a commission on purchases, at no cost to you.

Will it cool your room?

Room size (assumed)400 sq ft ≈ 37.2 m²

Fits a 37.2 m² room

This unit's cooling matches a 400 sq ft room. Set your room size to check the fit for your space.

At a glance

Best for hotel rooms, apartments and offices built with a ptac wall sleeve.

Cooling

2.8 kW

Size

Large

Noise

51 dB

Audible

Install: Wall sleeve and a dedicated circuitPermission: A new wall opening or circuit usually needs a permit

Performance

Cooling capacity: 9,600 BTU · 2.8 kW
Heating capacity: Yes
Room coverage: up to 450 sq ft
Energy Star: Not published
CEER: Not published
Annual energy (cooling): Not published

Noise, size & features

Indoor noise: 51 dB(A)about as loud as a refrigerator
Outdoor noise: Not published
Indoor unit: 42 x 16 x 21.5 in
Outdoor unit: None
Refrigerant: Not published
Wi-Fi / app: Not published
Outdoor unit needed: No
Wall sleeve: Fits a standard 42 x 16 in. PTAC sleeve

Will it fit your wall sleeve?

Fits standard 42 x 16-inch PTAC sleeves, other makers' included, without a baffle kit as long as the sleeve is no deeper than 13¾ inches (a deeper sleeve needs one). A new installation needs Friedrich's PDXWS sleeve and an outdoor grille, sold separately. Source: Friedrich PTAC brochure

Every through-the-wall AC and PTAC by the sleeve it fits

Installation & the rules that apply

This is a packaged terminal air conditioner (PTAC). It sits in a wall sleeve with an outdoor grille and runs on its own circuit, so the window-unit mounting and bracket rules do not apply to it. A new opening or circuit usually needs building and electrical permits and, in a condo, co-op or historic building, approval first.

Installation

Wall sleeve and a dedicated circuit

Refrigerant

GeneralRenters: get written landlord consent firstReviewed June 2026Often blocks install

GeneralCondo / HOA: exterior changes need approvalReviewed June 2026Permit required

GeneralHistoric / listed buildings: consent before any exterior unitReviewed June 2026Permit required

MassachusettsMassachusetts: local historic district approval (MGL c.40C)Reviewed June 2026Permit required

United StatesUS: local mechanical and electrical permits (vary by city)Reviewed June 2026Permit required

See full rules by region

Common questions about the Friedrich 9,600 BTU ZoneAire Select PTAC w/ Heat Pump - 208-230V

How loud is the Friedrich 9,600 BTU ZoneAire Select PTAC w/ Heat Pump - 208-230V?: 51 dB(A) indoors, about as loud as a refrigerator.
What size room does the Friedrich 9,600 BTU ZoneAire Select PTAC w/ Heat Pump - 208-230V cool?: It is rated to cool a room up to 450 sq ft (9,600 BTU · 2.8 kW).
Do I need a professional to install the Friedrich 9,600 BTU ZoneAire Select PTAC w/ Heat Pump - 208-230V?: Usually, yes. A PTAC installs in a wall sleeve with an outdoor grille and runs on its own dedicated circuit, so a new installation (the wall opening, sleeve, grille and wiring) is work for a contractor and an electrician. Swapping one into an existing PTAC sleeve with matching power is a simpler like-for-like replacement. It runs on 230 volts, so it needs a matching 230-volt outlet on its own circuit, and adding one is a job for an electrician.
Does the Friedrich 9,600 BTU ZoneAire Select PTAC w/ Heat Pump - 208-230V heat as well as cool?: Yes. It is a heat pump that also heats.

Buying guides for a PTAC like this

The questions buyers ask, answered from live prices and real specs. See where a PTAC like this fits.

Best 10,000 BTU AC AC for a 350 sq ft room Best AC that also heats

9,600 BTU ZoneAire Select PTAC w/ Heat Pump - 208-230V

Performance

Noise, size & features

Will it fit your wall sleeve?

Installation & the rules that apply

Common questions about the Friedrich 9,600 BTU ZoneAire Select PTAC w/ Heat Pump - 208-230V

Buying guides for a PTAC like this

More Friedrich ZoneAire models

9,600 BTU ZoneAire Select PTAC w/ Electric Heat - 208-230V

9,600 BTU ZoneAire Select PTAC w/ Heat Pump - 265V

9,600 BTU ZoneAire Select PTAC w/ Electric Heat - 265V