How loud is the Daikin Sensira FTXF35F / RXF35F?

20 dB(A) indoors, quieter than a whisper.

How energy-efficient is the Daikin Sensira FTXF35F / RXF35F?

Its efficiency rating is SEER 6.22.

What size room does the Daikin Sensira FTXF35F / RXF35F cool?

It is rated to cool a room 25–35 m² (3.3 kW · 11,300 BTU).

Do I need a professional to install the Daikin Sensira FTXF35F / RXF35F?

Yes. As a single split it needs a certified installer. Usually needs permission.

Does the Daikin Sensira FTXF35F / RXF35F heat as well as cool?

Yes. It also heats, rated 3.5 kW of heating output.

Single splitA++ Heats too

Daikin

Sensira FTXF35F / RXF35F

Name: Daikin Sensira FTXF35F / RXF35F
Brand: Daikin

Daikin's value mono-split: a dependable reverse-cycle wall unit that cools and heats a medium room without the premium price tag. Good efficiency and quiet running for the money.

€1,050

List price

indoor + outdoor unit, install extra (typically 400-700 EUR)

No live retailer link for this model right now.

Units like this are usually quoted and fitted by a specialist installer. Compare it against models you can buy today.

Will it cool your room?

Room size (assumed)35 m² ≈ 377 sq ft

Fits a 35 m² room

This unit's cooling matches a 35 m² room. Set your room size to check the fit for your space.

Installation cost

$2,500-6,000 fully installed for a typical room (the equipment is roughly $700-1,800, professional installation roughly $1,500-4,000+ depending on line-set run, electrical and access). The unit price you see here is hardware only; installation is the larger, separate cost.

A typical range for this system type, for comparison only, not a quote for this unit. The actual price depends on the line-set run, electrical work and access.

Compare similar units

At a glance

Best for budget-conscious homeowners cooling a bedroom or living room up to about 35 m2.

Cooling

3.3 kW

Size

Slim

Noise

20 dB

Silent

Install: Certified installerPermission: Usually needs permission

Performance

Cooling capacity: 3.3 kW · 11,300 BTU
Heating capacity: 3.5 kW
Room coverage: 25–35 m²
SEER (cooling): 6.22
SCOP (heating): 4.11
Energy class (cooling): A++
Energy class (heating): A+
Annual energy (cooling): 188 kWh

Noise, size & features

Model number: FTXF35F / RXF35F
Indoor noise: 20 dB(A)quieter than a whisper
Outdoor noise: 62 dB(A)
Indoor unit: 286 x 770 x 225 mm (HxWxD)
Outdoor unit: 550 x 658 x 275 mm (HxWxD)
Refrigerant: R32
Wi-Fi / app: Yes
Outdoor unit needed: Yes

What is good

Affordable entry into the Daikin range
Built-in Onecta Wi-Fi as standard
Quiet 20 dB(A) minimum indoor sound
Reliable inverter compressor

What to watch

A++ / A+ efficiency only, below premium models
Plainer design than Stylish or Perfera
No air purification features

Installation & the rules that apply

This is a single split. This is where regulation bites. Breaking into the refrigerant circuit must be done by an F-gas certified installer (in the EU and UK), and single-split systems may use refrigerant indefinitely only if its GWP is under 750 (R32 qualifies). DIY voids the warranty, home insurance and is an offence. The outdoor unit alters the facade, so a prior declaration to the town hall (e.g. France), planning permission, or freeholder, landlord and condominium consent is commonly needed, plus heritage rules in protected zones and minimum-distance and noise rules toward neighbours.

Installation

Certified installer

Refrigerant

R32

BelgiumCopropriete authorisation for shared partsReviewed June 2026Often blocks install

BelgiumCertified refrigeration technician required for split installsReviewed June 2026Often blocks install

FranceRenters need the landlord's written consent for a fixed unitReviewed June 2026Often blocks install

FranceCopropriete authorisation by the assemblee generaleReviewed June 2026Often blocks install

FranceArchitecte des Batiments de France in protected / heritage zonesReviewed June 2026Often blocks install

See full rules by region

Common questions about the Daikin Sensira FTXF35F / RXF35F

How loud is the Daikin Sensira FTXF35F / RXF35F?: 20 dB(A) indoors, quieter than a whisper.
How energy-efficient is the Daikin Sensira FTXF35F / RXF35F?: Its efficiency rating is SEER 6.22.
What size room does the Daikin Sensira FTXF35F / RXF35F cool?: It is rated to cool a room 25–35 m² (3.3 kW · 11,300 BTU).
Do I need a professional to install the Daikin Sensira FTXF35F / RXF35F?: Yes. As a single split it needs a certified installer. Usually needs permission.
Does the Daikin Sensira FTXF35F / RXF35F heat as well as cool?: Yes. It also heats, rated 3.5 kW of heating output.

Is a split even the right type?

Compare splits against the other types on price, noise, efficiency and install.

Mini-split vs window Mini-split vs portable

More split units around 3.3 kW

Single splitA++

Toshiba

Seiya RAS-B13E2KVG-E / RAS-13E2AVG-E

Toshiba's budget mono-split: a no-frills compact unit that cools and heats a small-to-medium room reliably at one of the lowest prices in the catalogue.

€900

Hardware price

+ pro install, usually $1,500-4,000

Details

Single splitA++

Cooper&Hunter

Veritas CH-S12FTXQ2-NG

The Cooper&Hunter Veritas NG is a well-equipped R32 inverter split with Wi-Fi, a wide operating temperature range and solid build quality, positioned as a value alternative to the big-name brands.

€560

Hardware price

+ pro install, usually $1,500-4,000

Details

Single splitA+++

Midea

Xtreme Save Pro MSAGBU-12HRFN8-ME

The Midea Xtreme Save Pro punches well above its price, delivering A+++ cooling efficiency, quiet operation and built-in Wi-Fi in an R32 inverter split that undercuts most premium-branded rivals on cost.

€598

Hardware price

+ pro install, usually $1,500-4,000

Details