Daikin 3MXM68A9 (3-room multi-split outdoor unit)
Multi-splitA+++ Heats too

Daikin

3MXM68A9 (3-room multi-split outdoor unit)

Daikin's 3MXM68A9 is a 6.8 kW three-zone multi-split outdoor unit (A+++ cooling), a popular choice for cooling and heating up to three rooms from a single condenser.

€1,993

List price

Outdoor unit only; indoor units priced separately. Approx EUR 1,993 incl. VAT at climaled.fr.

No live retailer link for this model right now.

Units like this are usually quoted and fitted by a specialist installer. Compare it against models you can buy today.

Sizing this system

This is a whole-home system: its rated cooling is shared across several indoor units or distributed through ductwork, so there is no single room it does or does not fit. An installer sizes each zone against that room (a Manual J calculation), which is why we do not print a room verdict here.

Installation cost

$5,000-15,000 fully installed depending on the number of zones (roughly $3,000-8,000+ for the multi-zone install on top of the equipment). A 2-room (2x1) setup sits near the lower end, a 4-5 room whole-home system near the top. The unit price you see here is hardware only; installation is the larger, separate cost.

A typical range for this system type, for comparison only, not a quote for this unit. The actual price depends on the line-set run, electrical work and access.

Compare similar units

At a glance

Best for three-room whole-home cooling and heating.

Cooling
6.8 kW
Size
-
Noise
-
Install: Certified installerPermission: Usually needs permission

Performance

Cooling capacity
6.8 kW · 23,200 BTU
Heating capacity
8.6 kW
Total coverage
45–90 m²
SEER (cooling)
8.5
SCOP (heating)
4.3
Energy class (cooling)
A+++
Energy class (heating)
Not published
Annual energy (cooling)
Not published

Noise, size & features

Model number
3MXM68A9
Indoor noise
Not published
Outdoor noise
48 dB(A)
Indoor unit
Not published
Outdoor unit
734 x 974 x 408 mm (HxWxD)
Refrigerant
R32
Wi-Fi / app
Yes
Outdoor unit needed
Yes

What is good

  • A+++ cooling efficiency, one of the most efficient 3-zone outdoor units
  • Connects up to 3 independently controllable indoor units
  • Quiet 48 dB(A) outdoor operation and compatible with Daikin WiFi control

What to watch

  • Outdoor unit only; indoor units and F-gas certified installation add cost
  • R32 refrigerant (GWP 675) above the future EU GWP 150 threshold

Installation & the rules that apply

This is a multi-split. Same F-gas certified-installer requirement and sub-750 GWP refrigerant rule as a single split, applied across a bigger system. Because it touches multiple rooms and routes pipes through the structure, it more often triggers planning or prior-declaration steps, freeholder, landlord or condominium and shared-wall consent, and neighbour distance and noise rules. Heritage and historic-centre restrictions apply to the outdoor unit just as for a single split, but the single shared condenser is often easier to get approved than several separate units.

Installation

Certified installer

Refrigerant

R32

BelgiumCopropriete authorisation for shared partsReviewed June 2026Often blocks install
BelgiumCertified refrigeration technician required for split installsReviewed June 2026Often blocks install
FranceRenters need the landlord's written consent for a fixed unitReviewed June 2026Often blocks install
FranceCopropriete authorisation by the assemblee generaleReviewed June 2026Often blocks install
FranceArchitecte des Batiments de France in protected / heritage zonesReviewed June 2026Often blocks install
See full rules by region

Common questions about the Daikin 3MXM68A9 (3-room multi-split outdoor unit)

How energy-efficient is the Daikin 3MXM68A9 (3-room multi-split outdoor unit)?
Its efficiency rating is SEER 8.5.
Do I need a professional to install the Daikin 3MXM68A9 (3-room multi-split outdoor unit)?
Yes. As a multi-split it needs a certified installer. Usually needs permission.
Does the Daikin 3MXM68A9 (3-room multi-split outdoor unit) heat as well as cool?
Yes. It also heats, rated 8.6 kW of heating output.