Do I need a professional to install the Friedrich Uni-Fit Through-The-Wall Smart Air Conditioner 8,000 BTU?

Not to replace a unit, but usually yes for a new opening. Sliding it into an existing wall sleeve it fits is a job you can do yourself (it is heavy, so plan on two people), with no refrigerant work. A new installation means cutting an opening through an exterior wall and fitting a sleeve, which is contractor work and usually needs a building permit.

Through-the-wall unit

Friedrich · Model UCT08B10A

Uni-Fit Through-The-Wall Smart Air Conditioner 8,000 BTU

Name: Friedrich Uni-Fit Through-The-Wall Smart Air Conditioner 8,000 BTU
Brand: Friedrich

A through-the-wall air conditioner rated at 8,000 BTU for rooms up to 350 sq ft. It installs in a wall sleeve.

$799

Live price at Abt Electronics

Price checked Oct 27, 2026

Buy at Abt Electronics In stock

Search Amazon

compare.ac may earn a commission on purchases, at no cost to you. It never changes the price you pay or how we rank units. As an Amazon Associate I earn from qualifying purchases.

Will it cool your room?

Room size (assumed)350 sq ft ≈ 32.5 m²

Fits a 350 sq ft room

This unit's cooling matches a 350 sq ft room. Set your room size to check the fit for your space.

Compare wall units by the sleeve they fit

At a glance

Best for replacing a through-the-wall unit in an existing wall sleeve.

Cooling

8,000 BTU

Size

Noise

Install: Slides into a wall sleevePermission: A new wall opening usually needs a permit

Where to buy

2 retailers

Abt ElectronicsLowest In stock$799Buy
Sylvane In stock$799Buy
AmazonPrice and stock shown on AmazonSearch Amazon

Prices & stock checked Oct 27, 2026.compare.ac may earn a commission on purchases, at no cost to you. It never changes the price you pay.As an Amazon Associate I earn from qualifying purchases.

Performance

Cooling capacity: 8,000 BTU · 2.3 kW
Power while cooling: 755 W (6.9 A at 115 V), about $0.14 an hour
Heating capacity: Cooling only
Room coverage: up to 350 sq ft
Energy Star: Not published
CEER: Not published
Annual energy (cooling): Not published

Noise, size & features

Model number: UCT08B10A
Indoor noise: Not published
Outdoor noise: Not published
Indoor unit: Not published
Outdoor unit: None
Refrigerant: R-32
Wi-Fi / app: Not published
Outdoor unit needed: No
Power supply: 115 V, NEMA 5-15P plug
Wall sleeve: Fits 24½, 26 and 27 in. sleeves
Warranty: 5-Year Warranty

Supply voltage, plug, cooling power, cooling current, refrigerant and warranty are from Sylvane's published specifications for this exact configuration, checked Oct 18, 2026.

Power while cooling: From the maximum cooling draw its retailer lists for this exact model. An hour's cost is at that draw and the US average electricity price of 18.44¢/kWh (U.S. Energy Information Administration, Electric Power Monthly Table 5.6.A (residential average, May 2026)). The compressor cycles once the room is cool, so most hours cost less.

Will it fit your wall sleeve?

Friedrich says the Uni-Fit fits existing 24½, 26 and 27-inch sleeves, and lists these makers' sleeves (25½ to 27 inches wide) as compatible: Amana, Carrier 51S and 52F, Fedders/Emerson, Friedrich WallMaster (WSE), GE/Hotpoint, Whirlpool, Frigidaire and White-Westinghouse. A trim ring covers gaps of up to 1 inch at the sides and ½ inch at the top, and in an existing sleeve Friedrich's manual has you replace the old rear grille with the one in the kit. A new installation needs Friedrich's USC or USEZ sleeve, sold separately. Source: Friedrich Uni-Fit brochure (sleeve table)

Every through-the-wall AC and PTAC by the sleeve it fits

What is good

Uses R-32 (GWP 675), the low-GWP class new US residential equipment moved to.

Installation & the rules that apply

This is a through-the-wall air conditioner. It sits in a sleeve built into an exterior wall, so the window-unit mounting and bracket rules do not apply to it. Swapping it into an existing sleeve is a like-for-like replacement; cutting a new opening changes the building's exterior wall, which usually needs a building permit and, in a condo, co-op or historic building, approval first.

Installation

Slides into a wall sleeve

Refrigerant

R-32

GeneralRenters: get written landlord consent firstReviewed June 2026Often blocks install

GeneralCondo / HOA: exterior changes need approvalReviewed June 2026Permit required

GeneralHistoric / listed buildings: consent before any exterior unitReviewed June 2026Permit required

MassachusettsMassachusetts: local historic district approval (MGL c.40C)Reviewed June 2026Permit required

United StatesUS: local mechanical and electrical permits (vary by city)Reviewed June 2026Permit required

See full rules by region

Common questions about the Friedrich Uni-Fit Through-The-Wall Smart Air Conditioner 8,000 BTU

How many watts does the Friedrich Uni-Fit Through-The-Wall Smart Air Conditioner 8,000 BTU use?: It draws 755 watts (6.9 amps at 115 V) while cooling at full power, per its retailer's specification for this exact model. At the US average electricity price that is about $0.14 an hour; once the room is cool the compressor cycles, so most hours cost less.
What size room does the Friedrich Uni-Fit Through-The-Wall Smart Air Conditioner 8,000 BTU cool?: It is rated to cool a room up to 350 sq ft (8,000 BTU · 2.3 kW).
Do I need a professional to install the Friedrich Uni-Fit Through-The-Wall Smart Air Conditioner 8,000 BTU?: Not to replace a unit, but usually yes for a new opening. Sliding it into an existing wall sleeve it fits is a job you can do yourself (it is heavy, so plan on two people), with no refrigerant work. A new installation means cutting an opening through an exterior wall and fitting a sleeve, which is contractor work and usually needs a building permit.