Friedrich
9,000 BTU Zone Premier PTAC with Heat Pump
A packaged terminal air conditioner (PTAC) rated at 9,000 BTU for rooms up to 400 sq ft. It heats in winter too and installs in a wall sleeve.
$1,149
List priceNo live retailer for this exact model right now.
Last listed at Sylvane for $1,169 on Sep 9, 2026. We have not been able to confirm it since.
The closest PTAC you can buy today:
Friedrich 10,000 BTU ZoneAire Premier PTAC w/ Electric Heat - 208-230VCovers up to 400 sq ft In stock$1,099View compare.ac may earn a commission on purchases, at no cost to you.
Will it cool your room?
This unit's cooling matches a 400 sq ft room. Set your room size to check the fit for your space.
At a glance
Best for hotel rooms, apartments and offices built with a ptac wall sleeve.
Performance
- Cooling capacity
- 9,000 BTU · 2.6 kW
- Power while cooling
- 800 W (3.9 A at 208/230 V), about $0.15 an hour
- Heating capacity
- 8,500 BTU
- Heat source
- Heat pump
- Power at rated heat
- 690 W, about $0.13 an hour
- Room coverage
- up to 400 sq ft
- Energy Star
- Not published
- EER
- 12.1 (federal minimum 11.3)
- Annual energy (cooling)
- Not published
Noise, size & features
- Indoor noise
- 50 dB(A)about as loud as a refrigerator
- Outdoor noise
- Not published
- Indoor unit
- 42 x 16 x 21 in
- Outdoor unit
- None
- Refrigerant
- R-32
- Wi-Fi / app
- Not published
- Outdoor unit needed
- No
- Power supply
- 208/230 V, NEMA 6-20P plug
- Wall sleeve
- Fits a standard 42 x 16 in. PTAC sleeve
- Warranty
- 2-Year Limited Warranty on Parts and Labor, 5-Year Limited Warranty on Sealed Refrigeration System
EER, heating capacity, heat source, heating power, supply voltage, plug, cooling power, cooling current, refrigerant and warranty are from Sylvane's published specifications for this exact configuration, checked Oct 18, 2026.
Power while cooling: From the maximum cooling draw its retailer lists for this exact model. An hour's cost is at that draw and the US average electricity price of 18.44¢/kWh (U.S. Energy Information Administration, Electric Power Monthly Table 5.6.A (residential average, May 2026)). The compressor cycles once the room is cool, so most hours cost less.
Hourly heating cost: At the rated heating output and the US average electricity price of 18.44¢/kWh (U.S. Energy Information Administration, Electric Power Monthly Table 5.6.A (residential average, May 2026)). A thermostat cycles the heat, so most hours cost less. A heat pump's output and advantage shrink as it gets colder outside, and one with an electric back-up heater draws far more while that runs.
Will it fit your wall sleeve?
Fits standard 42 x 16-inch PTAC sleeves, other makers' included, without a baffle kit as long as the sleeve is no deeper than 13¾ inches (a deeper sleeve needs one). A new installation needs Friedrich's PDXWS sleeve and an outdoor grille, sold separately. Source: Friedrich PTAC brochure
Every through-the-wall AC and PTAC by the sleeve it fitsInstallation & the rules that apply
This is a packaged terminal air conditioner (PTAC). It sits in a wall sleeve with an outdoor grille and runs on its own circuit, so the window-unit mounting and bracket rules do not apply to it. A new opening or circuit usually needs building and electrical permits and, in a condo, co-op or historic building, approval first.
Wall sleeve and a dedicated circuit
R-32
Common questions about the Friedrich 9,000 BTU Zone Premier PTAC with Heat Pump
- How loud is the Friedrich 9,000 BTU Zone Premier PTAC with Heat Pump?
- 50 dB(A) indoors, about as loud as a refrigerator.
- How many watts does the Friedrich 9,000 BTU Zone Premier PTAC with Heat Pump use?
- It draws 800 watts (3.9 amps at 208/230 V) while cooling at full power, per its retailer's specification for this exact model. At the US average electricity price that is about $0.15 an hour; once the room is cool the compressor cycles, so most hours cost less.
- What size room does the Friedrich 9,000 BTU Zone Premier PTAC with Heat Pump cool?
- It is rated to cool a room up to 400 sq ft (9,000 BTU · 2.6 kW).
- Do I need a professional to install the Friedrich 9,000 BTU Zone Premier PTAC with Heat Pump?
- Usually, yes. A PTAC installs in a wall sleeve with an outdoor grille and runs on its own dedicated circuit, so a new installation (the wall opening, sleeve, grille and wiring) is work for a contractor and an electrician. Swapping one into an existing PTAC sleeve with matching power is a simpler like-for-like replacement.
- Does the Friedrich 9,000 BTU Zone Premier PTAC with Heat Pump heat as well as cool?
- Yes. It is a heat pump that also heats, rated 8,500 BTU of heating output on 690 watts. That is about 3.6 times the heat per watt of an electric coil, at its rating point. At its rated heat it costs about $0.13 an hour at the US average electricity price.
Buying guides for a PTAC like this
The questions buyers ask, answered from live prices and real specs. See where a PTAC like this fits.
