Do I need a professional to install the Friedrich 10,000 BTU Through-The-Wall Smart Air Conditioner?

Not to replace a unit, but usually yes for a new opening. Sliding it into an existing wall sleeve it fits is a job you can do yourself (it is heavy, so plan on two people), with no refrigerant work. A new installation means cutting an opening through an exterior wall and fitting a sleeve, which is contractor work and usually needs a building permit.

Through-the-wall unit

Friedrich · Model UCT10B10A

10,000 BTU Through-The-Wall Smart Air Conditioner

Name: Friedrich 10,000 BTU Through-The-Wall Smart Air Conditioner
Brand: Friedrich

A through-the-wall air conditioner rated at 10,000 BTU for rooms up to 450 sq ft. It installs in a wall sleeve.

$849

Live price at Abt Electronics

Price checked Oct 27, 2026

Buy at Abt Electronics In stock

Search Amazon

compare.ac may earn a commission on purchases, at no cost to you. It never changes the price you pay or how we rank units. As an Amazon Associate I earn from qualifying purchases.

Will it cool your room?

Room size 700 sq ft ≈ 65 m²

Undersized for 700 sq ft

This is undersized for your 700 sq ft room. It would run flat out and struggle to keep up.

Compare wall units by the sleeve they fit

At a glance

Best for replacing a through-the-wall unit in an existing wall sleeve.

Cooling

10,000 BTU

Size

Noise

Install: Slides into a wall sleevePermission: A new wall opening usually needs a permit

Where to buy

2 retailers

Abt ElectronicsLowest In stock$849Buy
Electronic Express In stock$849Buy
AmazonPrice and stock shown on AmazonSearch Amazon

Prices & stock checked Oct 27, 2026.compare.ac may earn a commission on purchases, at no cost to you. It never changes the price you pay.As an Amazon Associate I earn from qualifying purchases.

Performance

Cooling capacity: 10,000 BTU · 2.9 kW
Heating capacity: Cooling only
Room coverage: up to 450 sq ft
Energy Star: Not published
CEER: Not published
Annual energy (cooling): Not published

Noise, size & features

Model number: UCT10B10A
Indoor noise: Not published
Outdoor noise: Not published
Indoor unit: Not published
Outdoor unit: None
Refrigerant: Not published
Wi-Fi / app: Not published
Outdoor unit needed: No
Wall sleeve: Not confirmed by the maker

Will it fit your wall sleeve?

We could not confirm which sleeve sizes it fits from its maker's own documents, so check the installation manual against the inside width and height of your sleeve before you buy.

Every through-the-wall AC and PTAC by the sleeve it fits

Installation & the rules that apply

This is a through-the-wall air conditioner. It sits in a sleeve built into an exterior wall, so the window-unit mounting and bracket rules do not apply to it. Swapping it into an existing sleeve is a like-for-like replacement; cutting a new opening changes the building's exterior wall, which usually needs a building permit and, in a condo, co-op or historic building, approval first.

Installation

Slides into a wall sleeve

Refrigerant

GeneralRenters: get written landlord consent firstReviewed June 2026Often blocks install

GeneralCondo / HOA: exterior changes need approvalReviewed June 2026Permit required

GeneralHistoric / listed buildings: consent before any exterior unitReviewed June 2026Permit required

MassachusettsMassachusetts: local historic district approval (MGL c.40C)Reviewed June 2026Permit required

United StatesUS: local mechanical and electrical permits (vary by city)Reviewed June 2026Permit required

See full rules by region

Common questions about the Friedrich 10,000 BTU Through-The-Wall Smart Air Conditioner

What size room does the Friedrich 10,000 BTU Through-The-Wall Smart Air Conditioner cool?: It is rated to cool a room up to 450 sq ft (10,000 BTU · 2.9 kW).
Do I need a professional to install the Friedrich 10,000 BTU Through-The-Wall Smart Air Conditioner?: Not to replace a unit, but usually yes for a new opening. Sliding it into an existing wall sleeve it fits is a job you can do yourself (it is heavy, so plan on two people), with no refrigerant work. A new installation means cutting an opening through an exterior wall and fitting a sleeve, which is contractor work and usually needs a building permit.