MRCOOL Advantage 24,000 BTU 5th Gen Mini Split… | compare.ac
MRCOOL Advantage 24,000 BTU 5th Gen Mini Split vs Pioneer Diamante Pro 24,000 BTU High-Wall Series Ductless Mini Split
The MRCOOL Advantage 24,000 BTU 5th Gen Mini Split and the Pioneer Diamante Pro 24,000 BTU High-Wall Series Ductless Mini Split side by side on one honest scale: cooling, room coverage, noise, energy rating and live price, with which one actually fits your room. Every number is the manufacturer's own or a live retailer price. We never invent a spec.
The verdict
For your 700 sq ft room, the better fit is the Pioneer Diamante Pro 24,000 BTU High-Wall Series Ductless Mini Split (covers up to 1,000 sq ft). It is also the cheaper of the two.
Both units are scored on the exact same scale, from the manufacturer's own published specs and the live retailer price where we have one. Room fit uses the official ENERGY STAR sizing chart, or an estimate from cooling power when a maker publishes no coverage. Where the two efficiency scales are not comparable, we never crown a winner. Nobody can pay for placement.
Should I buy the MRCOOL Advantage 24,000 BTU 5th Gen Mini Split or the Pioneer Diamante Pro 24,000 BTU High-Wall Series Ductless Mini Split?
The MRCOOL Advantage 24,000 BTU 5th Gen Mini Split and the Pioneer Diamante Pro 24,000 BTU High-Wall Series Ductless Mini Split are close alternatives: the Pioneer Diamante Pro 24,000 BTU High-Wall Series Ductless Mini Split is cheaper at $1,438. Set your room size to see which one fits it better.
Which is cheaper, the MRCOOL Advantage 24,000 BTU 5th Gen Mini Split or the Pioneer Diamante Pro 24,000 BTU High-Wall Series Ductless Mini Split?
The Pioneer Diamante Pro 24,000 BTU High-Wall Series Ductless Mini Split is cheaper at $1,438, versus $1,649 for the MRCOOL Advantage 24,000 BTU 5th Gen Mini Split. That is the current live retailer price where we have one, otherwise the listed price.
Which cools a bigger room, the MRCOOL Advantage 24,000 BTU 5th Gen Mini Split or the Pioneer Diamante Pro 24,000 BTU High-Wall Series Ductless Mini Split?
The MRCOOL Advantage 24,000 BTU 5th Gen Mini Split covers the larger room (up to 1,050 sq ft), while the Pioneer Diamante Pro 24,000 BTU High-Wall Series Ductless Mini Split covers up to 1,000 sq ft. Match the unit to your room: an oversized AC short-cycles and leaves the air cool but humid, while an undersized one never keeps up.
Do I need a professional to install the MRCOOL Advantage 24,000 BTU 5th Gen Mini Split or the Pioneer Diamante Pro 24,000 BTU High-Wall Series Ductless Mini Split?
Both are single splits that need a certified installer to handle the refrigerant, so neither is a DIY install. Factor fitting into the total cost.
How much cooling power do I need for my room?
A common US rule of thumb for a standard, reasonably insulated room with an 8-foot ceiling is about 20 BTU per hour per square foot, so a 300 sq ft room is often quoted around 6,000 BTU and a 500 sq ft room around 10,000 BTU. compare.ac instead sizes against the official ENERGY STAR room air conditioner chart, which is not a flat rate: it recommends about 7,000 BTU for that same 300 sq ft room and about 12,000 BTU for a 500 sq ft room, then adjusts up for a hot or humid climate and down for a mild one once you pick your region. Add capacity for a sunny west-facing or top-floor room, a kitchen, or extra people who are regularly in it. Undersizing means the unit runs flat out and never cools; oversizing short-cycles and leaves the room cool but clammy.
What will it cost to run, and what do the efficiency ratings mean?
Running cost is driven by efficiency: CEER on window and portable units, and SEER2 on mini-splits. Higher is better on both, but they are separate scales and a SEER2 number cannot be read as a ratio against a CEER number. Directionally, an efficient inverter mini-split is the cheapest type to run, while a single-hose portable can cost roughly two to three times as much for the same comfort, because much of its capacity is lost back through the exhaust hose. For window and portable units that ENERGY STAR certifies, we go a step further and show an estimated dollars-per-year figure, taken from the model's published annual energy use (a DOE test that assumes about 750 hours of cooling a year) priced at the average US residential electricity rate. It is a standardized figure for comparing units, not a personal bill: your real cost depends on how much you run it, your local electricity rate, and your climate. Mini-splits are usually the most efficient of all but are rated on SEER2, so we do not convert those to a dollar figure, and a missing running cost is a data gap, never a sign a unit is worse.
